Cube notation

Cube Rotations: What x, y, z and y' Mean

Quick answer

A cube rotation turns the whole cube in your hands, so no layer moves against another. x follows the direction of R, y follows U and z follows F; a prime (') reverses the direction, so y' turns the whole cube counterclockwise as seen from the top. Rotations change which face is in front. They don't scramble or solve anything.

On this pageWhat does y' mean on a Rubik's Cube?

What does y' mean? In plain words, y' means "turn the whole cube to the right, as if you were turning the top face counterclockwise, and keep holding it." Nothing on the cube moves against anything else. The face that was on your left is now in front of you, and you carry on with the algorithm from that new view.

Letters like R, U and F turn one layer. The lowercase letters x, y and z turn the entire puzzle, so they change your point of view, not the puzzle. The WCA Regulations put it simply: rotations do not change the puzzle state (Regulation 12i+).

If you want the full move chart, it already lives in our Rubik's Cube notation guide. This page focuses on rotations: what each one does, which way is clockwise and how to use fewer of them.

What does y' mean on a Rubik's Cube?

y' is a whole-cube rotation in the same direction as U' (Regulation 12a4b). Hold the cube with the top face up and turn everything counterclockwise as you look down at that top face.

  • y: turn the whole cube the same way as U. The right face comes to the front.
  • y': turn the whole cube the same way as U'. The left face comes to the front.
  • y2: turn the whole cube 180 degrees around the same axis. The back face comes to the front, and it does not matter which way you turn.

A quick example: hold the cube with green in front and red on your left. After y', red is in front, green has moved to your right and the top face is still on top.

When you see y' at the start of an algorithm, do the rotation first, then read the rest of the moves from the new front face.

x, y and z at a glance

Each rotation follows one face turn, but moves all three layers together. The WCA definitions in Article 12 are short enough to memorize:

  • x: same direction as R. The front face goes up to the top, and the bottom face comes to the front.
  • x': same direction as R'. The top face comes down to the front.
  • x2: a half turn around the R axis. The bottom face is now on top, and the back face is now in front.
  • y: same direction as U. The right face comes to the front.
  • y': same direction as U'. The left face comes to the front.
  • y2: a half turn around the U axis. The back face comes to the front.
  • z: same direction as F. The left face goes up to the top, and the top face moves to the right.
  • z': same direction as F'. The right face goes up to the top.
  • z2: a half turn around the F axis. The bottom face is now on top, and the front face stays in front.

The regulations also link each rotation to the opposite face: x matches L', y matches D' and z matches B' (Regulation 12a4a). That helps when you read an algorithm from the other side of the cube.

Which way is clockwise?

Clockwise always means clockwise as you look straight at the face the rotation follows. That is the same rule used for face turns (Regulation 12a1).

  • For x, look at the right face. Clockwise from there is the R direction.
  • For y, look at the top face. Clockwise from there is the U direction.
  • For z, look at the front face. Clockwise from there is the F direction.
  • A prime (') always goes the other way, and a 2 always means a half turn.

Common mix-ups:

  • y' vs U': both move the same way, but U' turns only the top layer, while y' turns the whole cube. If the middle and bottom layers stay still, you did U', not y'.
  • x vs R: both move the same way. R turns only the right layer, while x turns the whole cube. After R the cube is scrambled; after x it is simply held differently.
  • y vs y': if the right face came to the front, you did y. If the left face came to the front, you did y'.
  • z vs x: z turns around the axis that points at you, like a steering wheel. x tips the cube forward or backward.

If you are unsure, say the new front face out loud after each rotation.

Rotations vs face turns vs wide moves

On a 3x3 there are three sizes of move around the same axis:

  • R turns one layer, the right face.
  • Rw turns two layers: the right face plus the middle slice next to it. Many tutorials write this as lowercase r.
  • x turns all three layers, which is the whole cube.

The WCA calls Rw an outer block move: an outer slice turned together with adjacent inner slices. On a 3x3, Rw and 2Rw mean the same two-layer move (Regulation 12a2). Lowercase r is common shorthand outside the regulations, but it is not WCA notation. In an official Fewest Moves solution a lowercase r is read as R, not Rw, so write Rw there (Regulation E2c6+).

The full chart, including slice moves, is in our notation guide. On bigger cubes, wide moves can turn more than two layers; see how to solve a 4x4 Rubik's Cube for how they appear there.

Why algorithms include rotations

Comfortable fingertricks. Some last-layer cases are much easier to turn from a different grip. A common Aa perm, for example, is written x R' U R' D2 R U' R' D2 R2 x'. The opening x tips the cube so the rest of the algorithm can be turned with R, U and D moves, and the closing x' returns the cube to where it started. Learn the set in two-look PLL and then full PLL.

Setting up an F2L pair. In F2L, a y or y' can bring a pair from the back to the front, where you can see and turn it more easily. That is convenient when you are learning, and many cases in our F2L algorithms guide are easiest to understand from the front.

The cost is the pause. Each rotation means a re-grip while your eyes find the new front face, and several per solve break your flow.

How to use fewer rotations in your solves

You will not remove every rotation, and you do not need to. The goal is to stop doing the ones you do out of habit.

  • Use AUF first. Before you rotate to reach a pair, try a U, U' or U2 to bring it to a slot you can already see.
  • Pick a different slot. If a pair is easier to insert into a front slot, solve that one first and leave the back slot for later.
  • Learn back-slot inserts. Our rotationless F2L guide shows how to insert pairs into back slots without turning the whole cube.
  • Plan the cross with the pairs in mind. During inspection, choose a cross that leaves easy pairs in front of you. Cross planning in inspection covers this, and color neutrality gives you more cross choices.
  • Look ahead instead of rotating to search. If you rotate just to find a piece, practise tracking the next pair while you solve the current one with F2L lookahead.

Keep the rotations that are part of an algorithm you turn comfortably, such as the x at the start of a PLL. Those are planned and fast. The ones to cut are the unplanned y and y' turns between F2L pairs.

A 5-minute drill for reading rotations

Try this short routine before a practice session:

  • One minute: hold a solved cube and call out the new front face after each rotation. Do y, y', x, x', z and z' in random order.
  • One minute: mirror y and y'. Do y and say which face came to the front, then do y' and say it again. Repeat until you no longer hesitate.
  • Two minutes: do one short algorithm that includes a rotation slowly, such as the Aa perm above. Pause after the rotation and name the new front face before you continue.
  • One minute: time five solves and count how many times you rotate during F2L. Write the number down and try to lower it next time.

The point is reading each rotation correctly the first time, not speed.

How CuberPal helps

  • The algorithm trainer helps you drill algorithms, including ones that start or end with a rotation.
  • The cube timer records your solves, so you can time the five-solve rotation count above.
  • AI solve feedback helps you review an attempt and see where you lost time.
  • F2L pause detection highlights where you stop during F2L, which is often where an unplanned rotation happens.

Use the drill, then check whether your F2L pauses shrink as your rotations go down.

Continue the learning path

Cube fundamentals

Learn the notation, then use a visual solver only when you are genuinely stuck.

Open this topic cluster

Turn this into practice

CuberPal combines a WCA-style timer, AI solve analysis, CFOP lessons, algorithm catalogues, spaced repetition, and a camera cube solver so speedcubing advice becomes a daily training loop.

CuberPal 3x3 learning path with the Solid Foundation course and a finger tricks lesson

Frequently asked questions

What does y' mean on a Rubik's Cube?

y' means rotating the whole cube in the same direction as U', which is counterclockwise as you look at the top face. The left face comes to the front, and the top stays on top.

Is y' clockwise or counterclockwise?

Counterclockwise, as seen from the top face. y is the clockwise rotation, and y2 is a half turn.

What is the difference between x and R?

Both turn in the same direction, but R turns only the right layer, while x turns the whole cube. R changes the puzzle; x only changes how you hold it.

Do cube rotations count as moves?

It depends on the metric. In the WCA's Outer Block Turn Metric, rotations count as 0 moves; in Execution Turn Metric, each rotation counts as 1 move (Regulations 12a5 and 12a6). Fewest Moves results use Outer Block Turn Metric, but a Fewest Moves solution must also stay within 80 moves in Execution Turn Metric, rotations included (Regulations E2d and E2d1).

Sources and fact checks

  1. [1]WCA Regulations — Article 12 (Notation) — Official April 1, 2026 regulations. 12a4a–c define x/y/z; 12a5/12a6 define OBTM/ETM; 12i+ rotations do not change puzzle state. Checked 2026-11-09.
  2. [2]WCA Regulations — E2c6 / E2d (Fewest Moves) — E2d Fewest Moves uses OBTM; E2d1 80-move ETM cap including rotations; E2c6+ lowercase r interpreted as R. Checked 2026-11-09.
  3. [3]World Cube Association — Governing body for official twisty-puzzle competitions.
  4. [4]Cube Timer & Coach: CuberPal on the App Store — Supports CuberPal feature statements (listing checked 2026-11-09).
  5. [5]CuberPal on Google Play — Supports CuberPal feature statements (listing checked 2026-11-09).

Keep improving