Learning

The Roux Method Explained: Blocks, CMLL and Last Six Edges

Quick answer

Roux is a 3x3 speedsolving method created by Gilles Roux. You build a 1x2x3 block on the left, a second 1x2x3 block on the right, solve the four top corners with CMLL, then finish the last six edges using only M and U moves. It needs far fewer algorithms than full CFOP but more blockbuilding intuition.

On this pageWhat is the Roux method?

Most cubers learn a layer-by-layer method first, then move on to CFOP. Roux takes a different road. Instead of finishing the cube one layer at a time, you build two blocks on the sides, solve the top corners, and finish with fast middle-slice moves. Many solvers find it a refreshing way to think about the cube.

In short: Roux is a 3x3 speedsolving method created by Gilles Roux. You build a 1x2x3 block on the left, then a matching block on the right, solve the four top corners with CMLL, and finish the last six edges using only M and U moves. It needs far fewer algorithms than full CFOP, but it asks for more blockbuilding intuition.

This guide explains each step in plain words, how many algorithms Roux really needs, and how to start practicing it.

What is the Roux method?

Roux is a speedsolving method proposed by Gilles Roux in 2003, according to the Speedsolving.com wiki. It is built on blockbuilding and corners-first ideas, and the wiki describes it as notable for its low move count, its lack of cube rotations and its heavy use of M moves in the last step. Speedsolves with Roux average about 48 moves, again according to the wiki.

A Roux solve has four steps:

  • First block: build a 1x2x3 block on the left side of the cube.
  • Second block: build a matching 1x2x3 block on the right side, without breaking the first one.
  • CMLL: solve the four top-layer corners, ignoring the edges that are still unsolved.
  • Last six edges (LSE): solve the six remaining edges and the centers using only M and U moves.

The first two steps together are often called the first two blocks. Once they are done, the top layer and the middle slice are free to move, which is why most of the rest of the solve uses R, r, M and U moves and almost never needs a cube rotation. If M and r are new to you, our guide to wide and slice moves explains exactly what they mean, and the full move chart is in our Rubik's Cube notation guide.

Step 1: First block

The first block is a 1x2x3 block: one center and the edges and corners around it, sitting on the bottom-left of the cube. There is no fixed recipe for building it. You look for pieces that already sit close together and join them with as few moves as you can.

  • Plan in inspection. Use the inspection time to find where the block's pieces are, and try to plan the first few moves before you start.
  • Start small. Many solvers first build a smaller piece of the block, such as one edge and its center or a square of pieces, then extend it into the full 1x2x3.
  • Stay flexible. The best first block is often the one that is easiest to build on this particular scramble, not always the same color.

Because there is no algorithm for this step, it grows with practice. Slow, careful solves teach you far more here than fast ones.

Step 2: Second block

The second block is another 1x2x3 block, on the opposite side from the first. The difference is that you now have something to protect. You build the second block while keeping the first one intact.

The trick is to turn only the layers that do not touch the first block. In practice that means R, r, M and U moves. Each of those leaves the left block where it is, so you can bring pieces up through the top and middle and drop them into place on the right.

When both blocks are done, the bottom-left and bottom-right of the cube are solved. The top layer and the middle slice are still free, and the rest of the solve happens there. Moving between R and r without rotating takes some getting used to, much like rotationless F2L does in CFOP.

Step 3: CMLL

CMLL solves the four top-layer corners in one step: it orients and permutes them at the same time, without worrying about the top-layer and middle-slice edges. That freedom is what keeps it short.

  • One-look CMLL has 42 algorithms, according to the Speedsolving.com wiki.
  • You do not have to learn all 42 at once. The wiki notes the corners can also be solved in two steps, which needs fewer algorithms while you learn.
  • The wiki describes CMLL as similar to CLL, the popular 2x2 last-layer set. If you already know some CLL, or plan to, many CMLL cases will feel familiar. Our guide on how to learn CLL algorithms covers that set.

Start with the two-step approach so you can finish solves, then replace it with one-look cases a few at a time.

Step 4: Last six edges (LSE)

After CMLL, only six edges and the middle centers are left: the four top edges and the two bottom edges in the middle slice. The last six edges step solves them all with M and U moves only.

The Speedsolving.com wiki describes the classic way to break LSE into three stages:

  • Edge orientation. Turn the remaining edges so each one is oriented correctly, using M and U moves.
  • Left and right edges. Place the two edges that belong on the left and right of the top layer. After this, both side layers are complete.
  • The middle slice. Solve the last four edges and the centers in the M slice.

The wiki notes that Gilles Roux himself favors a flexible, semi-intuitive approach rather than a strict split into stages, so treat these as a starting map. LSE has very easy lookahead, and it is where Roux solves often look fastest.

How many algorithms does Roux need?

Fewer than most people expect. The Speedsolving.com wiki puts the method's algorithm count at 9 to 42, and CMLL is the main set:

  • First and second block: intuitive, no algorithms to memorize.
  • CMLL: 42 algorithms for the one-look version, or fewer with the two-step approach.
  • Last six edges: intuitive, using M and U moves.

That is why Roux is often called algorithm-light. The work moves from memorizing to recognizing and planning. Advanced solvers do add more, such as extra CMLL variations that also influence the last six edges, but you can solve full Roux with CMLL alone.

Is Roux hard to learn?

Roux is easy to memorize and harder to master. The blocks have no step-by-step rules, the M-slice turns take practice, and fewer tutorials exist than for CFOP. Some people love that freedom; others find it hard to tell whether they are improving. If you are deciding between methods, our full CFOP vs Roux guide compares them side by side. For a refresher on what CFOP involves, see what is CFOP and beginner method vs CFOP.

A simple Roux practice plan

You do not need to learn everything before your first full Roux solve. A steady plan works better:

  • Week 1: blocks only. Scramble, then build the first block slowly. When that feels comfortable, add the second block. Do not time yourself yet.
  • Week 2: two-step CMLL. Learn the small set of two-step corner algorithms so you can finish solves. Use your current method for the rest while you learn, if that helps.
  • Week 3: LSE drills. Practice the three LSE stages on their own. Work on clean M and U turns. Our fingertricks guide covers M-slice technique.
  • Week 4 and after: full timed solves. Time every solve and watch your averages, not single times. Our guide to ao5, ao12 and ao100 explains why.
  • Ongoing: add one-look CMLL cases a few at a time, starting with the ones that show up most in your solves.

If one-handed solving interests you, Roux is worth a look. The wiki notes the method's adaptability to one-handed solving. See our guides to one-handed cubing and getting faster at one-handed cubing.

Tracking Roux solves with CuberPal

CuberPal does not teach the Roux method. Its coaching and algorithm trainer are built around CFOP. What CuberPal can do for a Roux solver is the timing.

  • The cube timer works the same whatever method you use, including Roux.
  • It keeps your ao5 and ao12 averages and your personal bests, so you can see whether your Roux solves are actually getting faster.
  • Your stats build up over weeks, which is the honest way to judge a new method.

CuberPal is available on iPhone and Android. CuberPal Premium adds more, but the timer and averages are where a Roux solver starts.

Continue the learning path

Get faster at 3x3

Measure one solve, identify the slowest phase, and train that skill before chasing raw TPS.

Open this topic cluster

Turn this into practice

CuberPal combines a WCA-style timer, AI solve analysis, CFOP lessons, algorithm catalogues, spaced repetition, and a camera cube solver so speedcubing advice becomes a daily training loop.

CuberPal redesigned Roux CMLL starter catalog with a cube diagram and algorithm

Frequently asked questions

What is the Roux method?

Roux is a 3x3 speedsolving method in four steps: build a 1x2x3 block on the left, build a second 1x2x3 block on the right, solve the top corners with CMLL, then solve the last six edges using only M and U moves.

How many algorithms are in Roux?

The main algorithm set is CMLL, which has 42 algorithms for the one-look version, according to the Speedsolving.com wiki. You can start with a two-step version that needs fewer. The blocks and the last six edges are solved intuitively.

Is Roux good for beginners?

It can be. Roux needs few algorithms, but its blocks have no fixed recipe and the M-slice moves take practice. Many cubers learn CFOP first. Our CFOP vs Roux guide helps you choose.

Who invented the Roux method?

Gilles Roux proposed the method in 2003, according to the Speedsolving.com wiki. The method is named after him.

Sources and fact checks

  1. [1]Speedsolving Wiki: Roux method — Gilles Roux proposed the method in 2003. Infobox: Avg Moves Speed: 48; No. Algs: 9-42. One-look CMLL has 42 algorithms; two-step needs fewer (no count given). Notable for lack of rotations, heavy M-move use and one-handed adaptability. Rechecked 2026-11-16 from a local capture.
  2. [2]Speedsolving Wiki: CMLL — No. Algs: 42; similar to CLL. Rechecked 2026-11-16 from a local capture.
  3. [3]Speedsolving Wiki: LSE — Last six edges; Gilles Roux favors a flexible, semi-intuitive approach. Rechecked 2026-11-16 from a local capture.

Keep improving